What threshold height does this ramp fit?
A measured vertical transition of approximately 1 inch.

Exactly 1 in rise
$34.99
44.5 × 9.5 in · beveled rubber · one cable channel
Ships from a US warehouse in 6 to 8 days. Shipping to the United States is included. Shipping details.
One unbranded recycled-rubber threshold ramp for a measured 1-inch rise. It is 44.5 inches wide, provides a 9.5-inch approach, has beveled edges and a textured surface, and includes one underside channel for a cable. Measure the actual vertical transition; this is not a substitute for an accessibility-code or slope assessment.
The measurement
Exactly 1 in rise
44.5 × 9.5 in · beveled rubber · one cable channel
The fit
Illustration based on the product photo. Use the measurements written on this page.
One-inch rubber threshold ramp is listed for 44.5 × 9.5 in · beveled rubber · one cable channel. Compare every deciding measurement below with your space before ordering.
| Threshold rise | 1 in |
|---|---|
| Overall width | 44.5 in |
| Approach depth | 9.5 in |
| Dimensions | 44.5 × 9.5 × 1 in |
| Material | Recycled natural rubber |
| Surface | Textured, with beveled approach edges |
| Underside channels | 1 |
| Stated load capacity | 33069 lb |
| Not for | Transitions materially above or below 1 inch |



Ships from a US warehouse in 6 to 8 days. Shipping to the United States is included.
You can return an unused item within 30 days of delivery. You pay the return postage. If the item arrives damaged, or it is a different measurement than the product page states, write to support@utiliy.com and Utiliy pays the return.
A measured vertical transition of approximately 1 inch.
The ramp is 44.5 inches wide and 9.5 inches deep.
Yes. The underside has one reserved cable channel.
No. Compliance depends on the complete installed slope, landing, clear width, fastening and local requirements.
Utiliy transcribes published maker or supplier specifications into consistent units and does not fill in measurements that were not supplied.
Gaps up to 1.2 in
1/8 × 11/32 in kerf
Seals gaps up to 1-1/4 in
Standard duty · 12-5/8 in
Two 24.5 in doors
24–30 in door panels
Exactly 0.125 in
3.7–4.3 ft door