Will this fit any door frame?
No. The frame must have an existing kerf slot measuring about 1/8 inch by 11/32 inch.

1/8 × 11/32 in kerf
$9.99
81 in long · gaps up to 11/16 in · white
Ships from a US warehouse in 3 days. Shipping to the United States is included. Shipping details.
One Frost King DS7W/25 white vinyl-clad foam seal for an existing 1/8-inch by 11/32-inch door-frame kerf. The strip is 81 inches long with a 1-inch face and seals measurable gaps up to 11/16 inch. It is a press-in jamb seal, not an adhesive sweep.
The measurement
1/8 × 11/32 in kerf
81 in long · gaps up to 11/16 in · white
The fit
Illustration based on the product photo. Use the measurements written on this page.
Kerf door-frame seal, 81 in, white is listed for 81 in long · gaps up to 11/16 in · white. Compare every deciding measurement below with your space before ordering.
| Kerf cross-section | 1/8 × 11/32 in |
|---|---|
| Length | 81 in |
| Maximum gap | 11/16 in |
| Seal face width | 1 in |
| Seal type | Vinyl-clad foam press-in kerf seal |
| Color | White |
| Not for | Frames without a matching kerf slot or gaps over 11/16 inch |



Ships from a US warehouse in 3 days. Shipping to the United States is included.
You can return an unused item within 30 days of delivery. You pay the return postage. If the item arrives damaged, or it is a different measurement than the product page states, write to support@utiliy.com and Utiliy pays the return.
No. The frame must have an existing kerf slot measuring about 1/8 inch by 11/32 inch.
Door-jamb gaps up to 11/16 inch.
One 81-inch strip with a 1-inch-wide sealing face.
No. Its fin presses into a matching kerf cut in the door frame.
Utiliy transcribes published maker or supplier specifications into consistent units and does not fill in measurements that were not supplied.
Gaps up to 1.2 in
Seals gaps up to 1-1/4 in